Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces the drill attachment on your Trailer Valet XL, V2, or MV PRO trailer dolly. Can also be added to a Trailer Valet 5X so that you can use a cordless drill (not included) in place of the hand crank.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the replacement drill attachment for the Trailer Valet XL trailer dolly. This part will replace the drill attachment on your Trailer Valet XL trailer dolly. It is designed to fit the models TVXL2 and TVXL25. Now, it can be used with the Trailer Valet 5X swivel jack trailer mover. We sell that separately on our website, it's part number STC-V211 and you can use this in place of the hand-crank on that model. This basically will allow you to use a cordless drill to power your drive system.
That should do it for the review on the replacement drill attachment for the Trailer Valet XL trailer dolly.
Average Customer Rating: 4.5 out of 5 stars (168 Customer Reviews)
Replaces the drill attachment on your Trailer Valet XL, V2, or MV PRO trailer dolly. Can also be added to a Trailer Valet 5X so that you can use a cordless drill (not included) in place of the hand crank.
I purchased my trailer valet and drill attachment a year ago so that I could move my 20’ camper and jetskis easier. As a disabled vet moving the jetskis into my backyard via a gate to the main road was time consuming and took me an hour. Now it takes me 5-10 minutes. I store my trailer to the front of my home and wanted to make it harder to steal, but had no way to get the front of it close to my fence. With the trailer valet I am able to disconnect from my truck and move it into place within 15 minutes. This is a game changer for me because I can do it by myself and my trailer and jetskis are safely stored without much fuss. I often get asked how I move the front of my trailer so close to my fence. The trailer valet is the best thing I could have purchased. I can get in and out of tight spaces without hurting myself and without anyone else needing to help me.
For us, it's not a "replacement" (except for my rotator shoulders)
Hope it works;
Mechanical, it fits our 5X, and we'll SOON see how it works with a massive drill
This part in itself is great, but the Valet itself not so much. I have the Valet attached to a trailer parked on grass. The tread of the tires are equivalent as street tires on icy roads. The Valet is as designed when on packed dirt and asphalt.
This attachment works well. It is not difficult to use BUT one MUST be careful to keep the brake handle fully in the release position or one CAN break a wrist while using a drill motor - which is not the fault of the attachment.
Works as described/designed. Probably should be included in the purchase price of the trailer valet or even simpler make the attachment point universal rather than proprietary.
The uspc tracking is a little deceiving. It did not show as received for several days, it did however ship in a timely manor (about a week)
The trailer valet adaptor is of nice quality and works very well. Even though it is overpriced in my opinion.
Works great with drill, just be very very careful not to let brake handle on valet engage, guaranteed you’ll lose a big chunk of skin on your hand when the drill spins on you…
Excellent service and delivery.
Part looked good.
Tried everything to try and make the trailer valet xl work. I tried communicating with the company representative but ran into dead ends. etrailer tried to help but they didn’t manufacture the unit. This was supposed to move up to 10k pounds but not even close. Every time a boat and trailer was tried to be moved on flat concrete the torque would just pull the unit up under the trailer or just pull out of the trailer tongue. I was able to move one boat , it weighed 1500, far from the advertised weight. I now just takes up space
I am glad I bought the trailer valet unit. It has made getting our travel trailer in and out of our garage a lot easier. I would say that using the drill option for moving the trailer is useful, but the torque can hand you with some surprises, so you need to think ahead as you use that option. One useful hint: take the regular handle off before using the drill. In general, this device has worked well for us.
Did'nt work well with my 20v Drill
It does not work with the original Trailer Valet. It will not fit the square drive
Works perfect very happy
Good match for 5x valet trailer.
Candra G was great ?? I have the order in hand and I'm on track with my schedule. Thanks guys.
I have an extremely narrow area that I cannot back up my boat between the side of my house and fence. My truck cannot make the turn required and it is slightly uphill. With the drill attachment and my 18 volt brush less drill moving the boat into place using the Trailer Valet is an easy task that I could not do without this device. It was the deciding factor that allowed me to purchase the boat.
Put this in your cordless drill and move your trailer with ease!
In the write-up of the Trailer Valet XL, it was unclear whether this device was included or not. It was. So I wasted my money ordering this, but I needed to use the Valet as soon as I received it, so I couldn't take the change of having to order one later.
I did try it on gravel. It worked ok. I did use my drill, but it wasn't totally charged. Next time it will be totally charged.
Great service,quick delivery
I've used my Trailer Valet to move my 20' enclosed utility trailer around the driveway.
I've also used it to move my 30' camper around, putting planks down on the lawn to run the Valet across. It works good, but is quite a workout with heavy trailers. In confined spaces, there's just no other way to do the job. I would like to have my original Valet adaptable to the newer, "universal ball-mount" style so I wouldn't have to buy a new unit and just set aside the original unit. The new "ball-mount" Valet would greatly simplify using the Valet. Overall, I'm pleased with the quality and operation of my original unit.
Does what it is suppose to do.
power tools are always a better way than hand cranking.
This review will be for not only the Trailer Valet attachment, but for the Trailer Valet as well.
The good: works well on cement and with the attachment I don't have to push my boat into my garage (it has a slight incline at the entrance). E-Trailer is excellent for customer support! I had a couple of minor issues and they were really on top of getting me help.
The not-so-good: I've heard the Trailer Valet doesn't perform on grass or gravel. The attachment is made specifically for the Trailer Valet and you will not find another socket to work. Too bad the company chose to make extra money ($45) for a $5 part. On the Trailer Valet the bushings needed lubrication after one year because it started grinding. A simple fix but until I raised this issue the company did not have a video on how to do this maintenance. You will have to purchase ring clip pliers for this job.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
1/17/2023
I am sorry to hear that the Valet is not working for your needs. I see from the notes that Trailer Valet was supposed to reach out to you and I wanted to see if they did.